Code: Select all
* HP:Scratched MV:Full >
give raw gemcutter
You give a raw emerald to a master gemcutter. <-- FIRST CUTTING
* HP:Scratched MV:Full >
A master gemcutter holds the stone up to the light.
* HP:Scratched MV:Full >
A master gemcutter says 'Not a bad stone.'
* HP:Scratched MV:Full >
A master gemcutter says 'Now give me 10 crowns please.'
give 10 crowns gemcutter
* HP:Scratched MV:Full >
You give him ten crowns.
* HP:Scratched MV:Full >
A master gemcutter takes the emerald and holds it up to the light, examining it closely from all
sides.
A master gemcutter puts the stone on a plate that sits over a steaming bowl of water.
* HP:Scratched MV:Full >
A master gemcutter melts some wax and dips a dopstick into the fluid.
* HP:Scratched MV:Full >
A master gemcutter touches the wax on the dopstick to the stone.
* HP:Scratched MV:Full >
* HP:Scratched MV:Full >
A master gemcutter rotates the dopstick, shaping the wax so it attaches to a larger area of the
stone.
* HP:Scratched MV:Fresh >
A master gemcutter lets the wax harden.
* HP:Scratched MV:Fresh >
A master gemcutter starts working the handle on his scaif, causing the lap to turn.
* HP:Scratched MV:Fresh >
A master gemcutter presses the bottom of the stone to the lap, working on shaping the pavillion's
facets.
* HP:Scratched MV:Fresh >
A master gemcutter eyes the stone.
* HP:Scratched MV:Fresh >
A master gemcutter cuts a culet off the bottom tip of the stone.
* HP:Scratched MV:Fresh >
A master gemcutter eyes the stone.
* HP:Scratched MV:Fresh >
A master gemcutter shapes the girdle of the stone.
* HP:Scratched MV:Fresh >
A master gemcutter takes the stone off the dopstick and puts it on the plate again.
* HP:Scratched MV:Fresh >
A master gemcutter melts some wax and dips a dopstick into the fluid.
* HP:Scratched MV:Fresh >
A master gemcutter touches the wax on the dopstick to the finished bottom of the stone.
* HP:Scratched MV:Fresh >
A master gemcutter rotates the dopstick, shaping the wax so it attaches to a larger area of the
stone.
* HP:Scratched MV:Fresh >
A master gemcutter lets the wax harden.
* HP:Scratched MV:Fresh >
A master gemcutter eyes the stone.
* HP:Scratched MV:Fresh >
A master gemcutter presses the crown of the stone to the lap, shaping the facets.
* HP:Scratched MV:Fresh >
A master gemcutter eyes the stone.
* HP:Scratched MV:Fresh >
A master gemcutter presses the table of the stone to the lap.
* HP:Scratched MV:Fresh >
A master gemcutter changes the lap on the scaif and starts polishing the stone.
* HP:Scratched MV:Fresh >
A master gemcutter stops turning the handle of his scaif.
* HP:Scratched MV:Fresh >
A master gemcutter removes the stone from the dopstick and holds it up to the light.
* HP:Scratched MV:Fresh >
A master gemcutter says 'There were small fractures in this stone.'
* HP:Scratched MV:Fresh >
A master gemcutter says 'I couldn't make more of it than this.'
* HP:Scratched MV:Fresh >
A master gemcutter gives you a small sparkling emerald. <-- FIRST TIME WORKS
give raw gemcutter
* HP:Scratched MV:Fresh >
You give a raw emerald to a master gemcutter. <-- SECOND CUTTING
* HP:Scratched MV:Fresh >
A master gemcutter drops a raw emerald.
A master gemcutter holds the stone up to the light.
* HP:Scratched MV:Fresh >
A master gemcutter says 'Not a bad stone.'
* HP:Scratched MV:Fresh >
A master gemcutter says 'Now give me 10 crowns please.'
give 10 crowns gemcutter
* HP:Scratched MV:Fresh >
You give him ten crowns.
* HP:Scratched MV:Fresh >
A master gemcutter puts the stone on a plate that sits over a steaming bowl of water.
* HP:Scratched MV:Fresh >
A master gemcutter melts some wax and dips a dopstick into the fluid.
* HP:Scratched MV:Fresh >
A master gemcutter touches the wax on the dopstick to the stone.
* HP:Scratched MV:Fresh >
A master gemcutter rotates the dopstick, shaping the wax so it attaches to a larger area of the
stone.
* HP:Scratched MV:Fresh >
A master gemcutter lets the wax harden.
* HP:Scratched MV:Fresh >
A master gemcutter starts working the handle on his scaif, causing the lap to turn.
* HP:Scratched MV:Fresh >
A master gemcutter presses the bottom of the stone to the lap, working on shaping the pavillion's
facets.
* HP:Scratched MV:Fresh >
A master gemcutter eyes the stone.
* HP:Scratched MV:Fresh >
A master gemcutter cuts a culet off the bottom tip of the stone.
* HP:Scratched MV:Fresh >
A master gemcutter eyes the stone.
* HP:Scratched MV:Fresh >
A master gemcutter shapes the girdle of the stone.
* HP:Scratched MV:Fresh >
A master gemcutter takes the stone off the dopstick and puts it on the plate again.
* HP:Scratched MV:Fresh >
A master gemcutter melts some wax and dips a dopstick into the fluid.
* HP:Scratched MV:Fresh >
A master gemcutter touches the wax on the dopstick to the finished bottom of the stone.
* HP:Scratched MV:Fresh >
A master gemcutter rotates the dopstick, shaping the wax so it attaches to a larger area of the
stone.
* HP:Scratched MV:Fresh >
A master gemcutter lets the wax harden.
* HP:Healthy MV:Fresh >
A master gemcutter eyes the stone.
* HP:Healthy MV:Fresh >
A master gemcutter presses the crown of the stone to the lap, shaping the facets.
* HP:Healthy MV:Fresh >
A master gemcutter eyes the stone.
* HP:Healthy MV:Fresh >
A master gemcutter presses the table of the stone to the lap.
* HP:Healthy MV:Fresh >
A master gemcutter changes the lap on the scaif and starts polishing the stone.
* HP:Healthy MV:Fresh >
A master gemcutter stops turning the handle of his scaif.
* HP:Healthy MV:Fresh >
A master gemcutter removes the stone from the dopstick and holds it up to the light.
* HP:Healthy MV:Fresh >
A master gemcutter says 'There were small fractures in this stone.'
* HP:Healthy MV:Fresh >
A master gemcutter says 'I couldn't make more of it than this.'
* HP:Healthy MV:Fresh > <-- DOES NOT GIVE ME MY GEM